Toyota Venza First generation dimensions 2008–2017
The Toyota Venza First generation (2008–2017) is 480 cm long, 190.5 cm wide and 161 cm tall, with a 277.5 cm wheelbase. That makes it about 12 cm longer than the average SUV in our guide (468 cm across 456 versions). In size it is closest to the Cadillac XT5 (2016, 1.5 cm longer), the Ford S-Max (2015, same length) and the Lexus RX (2008, 3 cm shorter).
Compare with…
Size
Practicality
Info
No figure yet: width incl. mirrors, ground clearance, boot (seats up), boot (seats folded)
Sources: Wikipedia: Toyota Venza · Figures refer to: Figures from Wikipedia infobox "First generation"; production November 2008 – 2017. Dimensions may vary by trim, market and model year; check with the manufacturer.
Will the Toyota Venza fit?
UK parking bay 4.8 × 2.4 m
Fits, but tightIt fits inside the lines (0 cm spare in length), but at 210.5 cm wide (est.) including mirrors only about 14.8 cm is left each side — expect to squeeze out if cars park either side.
UK single garage 4.8 × 2.4 m, 7 ft door
Doesn't fitFold the mirrors to get through the door; too long to close the door behind it. Height 161 cm vs a 198 cm door.
Assumes a UK standard parking bay of 4.8 × 2.4 m and a typical UK single garage of 4.8 × 2.4 m inside (2.1 m high) with a 7 ft × 6 ft 6 in (213 × 198 cm) up-and-over door. Where we have no width-with-mirrors figure we add 20 cm to the body width. “Comfortably” leaves about 60 cm to walk round and open a door; “tight” means it goes in but getting out is awkward. Garages and bays vary a lot — measure yours and use the garage fit checker. For guidance only.
Sources
- Wikipedia: Toyota Venza · CC BY-SA 4.0
Figures taken from Wikipedia are used under CC BY-SA 4.0; see the linked article for its authors and history.